Süti beállítások
BeállításokElfogadom
  • Minőségi gépek
  • Szakértő személyzet
  • Kiszállítás világszerte
  • 1977-óta
4.8 Google Reviews

Famo felső hevederemelő növényekhez / fákhoz

Famo topbeltlifter for plants/trees image 1
Eladott
Famo topbeltlifter for plants/trees image 1
Famo topbeltlifter for plants/trees image 2
Famo topbeltlifter for plants/trees image 3
Famo topbeltlifter for plants/trees image 4
Famo topbeltlifter for plants/trees image 5
Famo topbeltlifter for plants/trees image 6
Figyelem: A gépre vonatkozó információk gépi fordítással készültek.

Leírás:

Famo felső hevederemelő növényekhez / fákhoz

The FAMO plant fitting machine has been especially developed for use in tree nurseries. It is designed to be mounted on to the right-hand side of the tractor. The frame is built from heavy square section tubing. This solid construction is necessary to withstand the enormous torque which develops during the fitting of larger trees. The whole machine is hydraulically driven. A heavy-duty I. oil pump supplies all the hydraulic motors and steering cylinders. The 100 l. oil tank, which is located on the left-hand-side, also saves as _ counter-weight to improve the balance of the combination. The lifting assembly with the ‘U’blade is attached to the tractor with two steering cylinders. one of these controls horizontal movement, the other one the depth of the blade and height of the belts. The electro-hydraulic steering valves are operated by means of a small control lever, located inside the tractor cab.

Two large  wheels, with low roll resistance, support the machine during lifting operation. These improve machine stability, especially in wet ground conditions.

Once the plants have been cut tree by the wide ‘U’ blade, they are gripped between 2 soft rubber belts, which run on nylon rollers, equipped with bearings. . After being lifted, the plants are automatically transferred to a  conveyer belt at the rear of the machine. The machine assistant can then conveniently collect the plants and stack them directly on the pallets carried by the integrated fork-lift. Subsequently, the full pallets can be automatically unloaded. After being picked up, the new pallet is lifted to approximately 33" (85 cm). This eliminates the need for bending during loading. As it is being filled, the pallet can be systematically lowered, thereby providing a very comfortable working position.  

Description:

The FAMO plant fitting machine has been especially developed for use in tree nurseries. It is designed to be mounted on to the right-hand side of the tractor. The frame is built from heavy square section tubing. This solid construction is necessary to withstand the enormous torque which develops during the fitting of larger trees. The whole machine is hydraulically driven. A heavy-duty I. oil pump supplies all the hydraulic motors and steering cylinders. The 100 l. oil tank, which is located on the left-hand-side, also saves as _ counter-weight to improve the balance of the combination. The lifting assembly with the ‘U’blade is attached to the tractor with two steering cylinders. one of these controls horizontal movement, the other one the depth of the blade and height of the belts. The electro-hydraulic steering valves are operated by means of a small control lever, located inside the tractor cab.

Two large  wheels, with low roll resistance, support the machine during lifting operation. These improve machine stability, especially in wet ground conditions.

Once the plants have been cut tree by the wide ‘U’ blade, they are gripped between 2 soft rubber belts, which run on nylon rollers, equipped with bearings. . After being lifted, the plants are automatically transferred to a  conveyer belt at the rear of the machine. The machine assistant can then conveniently collect the plants and stack them directly on the pallets carried by the integrated fork-lift. Subsequently, the full pallets can be automatically unloaded. After being picked up, the new pallet is lifted to approximately 33" (85 cm). This eliminates the need for bending during loading. As it is being filled, the pallet can be systematically lowered, thereby providing a very comfortable working position.  

Famo felső hevederemelő növényekhez / fákhoz


Sajnos ez a Famo felső hevederemelő növényekhez / fákhoz most elkelt.

Szeretne értesülni, ha elérhető lesz egy hasonló Felül terhelt emelők fákhoz? Itt töltse ki adatait.


Eladott

Márka
Termékcsoport
Szám
2330120123

Kérem, hívjon Reinier

Boldogan segítünk Önnek. Ügyfélszolgálati munkatársaink várják a hívását.

ELÉRHETŐSÉGEINKHívjon minket: +31 180 632 088

Leírás:


The FAMO plant fitting machine has been especially developed for use in tree nurseries. It is designed to be mounted on to the right-hand side of the tractor. The frame is built from heavy square section tubing. This solid construction is necessary to withstand the enormous torque which develops during the fitting of larger trees. The whole machine is hydraulically driven. A heavy-duty I. oil pump supplies all the hydraulic motors and steering cylinders. The 100 l. oil tank, which is located on the left-hand-side, also saves as _ counter-weight to improve the balance of the combination. The lifting assembly with the ‘U’blade is attached to the tractor with two steering cylinders. one of these controls horizontal movement, the other one the depth of the blade and height of the belts. The electro-hydraulic steering valves are operated by means of a small control lever, located inside the tractor cab.

Two large  wheels, with low roll resistance, support the machine during lifting operation. These improve machine stability, especially in wet ground conditions.

Once the plants have been cut tree by the wide ‘U’ blade, they are gripped between 2 soft rubber belts, which run on nylon rollers, equipped with bearings. . After being lifted, the plants are automatically transferred to a  conveyer belt at the rear of the machine. The machine assistant can then conveniently collect the plants and stack them directly on the pallets carried by the integrated fork-lift. Subsequently, the full pallets can be automatically unloaded. After being picked up, the new pallet is lifted to approximately 33" (85 cm). This eliminates the need for bending during loading. As it is being filled, the pallet can be systematically lowered, thereby providing a very comfortable working position.  

Miért döntene a használt gép mellett?

  • Gyorsan elérhető
  • Kisebb beszerzési költség
  • Alacsonyabb amortizációs költség
  • Megegyező funkcionalitás