Description:

Tarend RCD rotating box unloader for fruit in boxes of 40 - 60 cm wide complete with roller inspection table 300 x 100 cm

Tarend RCD rotating cratedumper 

This machine enables to unload the full fruit crates onto the conveyor belt in a continuous and gentle way. Machine can be used standalone or can be connected to other sorting or packing lines. The speed of the machine is adjustable and can be controlled via HMI for different capacities.

• Tarend RCD rotary box emptying machine Used for emptying boxes and crates of citrus fruit.
• Heightened for routing ‘ U ’ configuration Input belt full boxes/crates raw material 180° turn belt Rotating drum Collect & guide rail empty box/crate Transport belt 650 x 2,000 mm towards inspection table Max. 20kg raw product
• Min. dimensions crate 300mm x 400mm x 150mm Max. dimensions crate 400mm x 600mm x 350mm
• Electric: 3 phase 400V 50Hz null with ground
• Reason for selling: citrus they are packing at another site. The machine has run very little and is in good condition.

Roller inspection table 300 x 100 cm, equipped with lighting

• Aluminum rollers with a diameter of 50 mm, pitch 35 mm, spacing between rollers 20 mm
• Double platform for operators at the correct working height
• 1x waste and collection belt for Class 2 products
• 2x discharge belts for waste products
• 1x collection belt for waste products
• 1x conveyor belt for waste products, suitable for boxes up to 900 mm in height

The inspection table consists of a roller conveyor with aluminum rollers, each with a diameter of 50 mm and a pitch of 35 mm. This results in a maximum gap between the rollers of 20 mm. The rollers are 1,000 mm wide. On both sides, there is space for 4 operators, allowing up to 8 workers to operate the inspection table simultaneously. The maximum reach for each operator is 50 cm. The product is divided into two lanes by a guiding “roof” separator. The table is equipped with lighting to ensure proper product inspection.

Class 2 products are removed by a 250 mm wide conveyor belt located above the inspection table. This belt transfers the product at a right angle to a discharge belt, which moves the product to a Class 2 box provided by the customer. Defective and rotten products are removed by two belts located underneath the inspection table. These two belts transfer the products at a right angle to a discharge belt that leads to a box for defective and rotten products, also provided by the customer. All belts are frequency-controlled, except for the right-angle discharge belt for defective and rotten products.