Sorry this machine is already sold, but the following machines are available.
Sormac MS Combi knife peeling machine with RLT-60/200 roller inspection conveyor
Only 1Pros and cons
- With new display,new safety sensors and relais
- Top occasion
Description:
Sormac MS Combi knife peeling machine with RLT-60/200 roller inspection conveyor
Sormac MS Combi knife peeler + RLT-60/200 Roll reading belt
- Screw for perfectly adjustable throughput
- Adjustable speed
- Removable plates
- 240 knives
- Capacity: 500 - 600 kg per hour
- Length: 310 cm
- Width: 120 cm
- Height: 250 cm
- Checked and serviced
Advantages
Patented drum suspension
- Drum hangs freely in belts. As a result, drum rotation is quiet and stable with few wear parts as a result
- Aseptic motors
Motors are hermetically spray-proof (IP66) - Patented drum design MS Sorma
Product is peeled over the entire surface and flat peeling is effectively avoided - Drum with opening flaps MS Sormac
Large drum hatch: hinged hatch makes the drum and conveyor screw easily accessible for cleaning and maintenance
The Sormac knife peelers MS are designed for continuous peeling of pre-cleaned or pre-peeled tuberous products such as potatoes, red beets, celery, etc. Especially when post-peeling peeled but also steam-peeled products, the so-called ‘eyes’ and pressure spots are excellently removed. The end product has a very smooth appearance and looks as if peeled by hand.
The product to be peeled is transported by a transport auger through a horizontal rotating drum. This drum is fitted with a large number of knives at its periphery. By varying the speed of the drum and the speed of the transport worm, dwell time and peeling quantity can be controlled.
Due to the special shape of the drum and the placement of the knives, flat peeling of the product is effectively avoided. The waste is separated directly from the product and flung out through the rotating drum. It can be collected and disposed of in a crate or waste conveyor via the waste funnel at the bottom of the machine.
In the MS-20/Combi version, non-pre-peeled product can also be peeled. A number of peeling plates are provided in the drum to replace the effect of pre-treatment.
RLT-60/200 Roller inspection table
The Sormac roller reading table consists of a transport system with transport rollers fitted with grip profile. Laterally, the transport rollers are mounted on plastic chains that are moved by the drive. This movement causes the conveyor rollers to rotate. The product lying on top is thus rotated, allowing visual inspection from all sides. The transport rollers are easy to exchange.

Technical specifications:
Model: | MS Combi |
Condition | Including servicing |
Year: | 2011 |
Transport dimensions: | 525 cm x 145 cm x 250 cm (length x width x height) |
Transport weight: | 2000kg |
Sormac MS Combi knife peeling machine with RLT-60/200 roller inspection conveyor
Unfortunately, this Sormac MS Combi knife peeling machine with RLT-60/200 roller inspection conveyor has now been sold.
Would you like to be kept informed when a comparable Knife peeling machines becomes available? Fill in your details here.
Sold
Please contact Soufiane
We are happy to help. Our consultants are now waiting for you.
.jpg?resolution=100x100&quality=100&type=webp)
Description:
Sormac MS Combi knife peeler + RLT-60/200 Roll reading belt
- Screw for perfectly adjustable throughput
- Adjustable speed
- Removable plates
- 240 knives
- Capacity: 500 - 600 kg per hour
- Length: 310 cm
- Width: 120 cm
- Height: 250 cm
- Checked and serviced
Advantages
Patented drum suspension
- Drum hangs freely in belts. As a result, drum rotation is quiet and stable with few wear parts as a result
- Aseptic motors
Motors are hermetically spray-proof (IP66) - Patented drum design MS Sorma
Product is peeled over the entire surface and flat peeling is effectively avoided - Drum with opening flaps MS Sormac
Large drum hatch: hinged hatch makes the drum and conveyor screw easily accessible for cleaning and maintenance
The Sormac knife peelers MS are designed for continuous peeling of pre-cleaned or pre-peeled tuberous products such as potatoes, red beets, celery, etc. Especially when post-peeling peeled but also steam-peeled products, the so-called ‘eyes’ and pressure spots are excellently removed. The end product has a very smooth appearance and looks as if peeled by hand.
The product to be peeled is transported by a transport auger through a horizontal rotating drum. This drum is fitted with a large number of knives at its periphery. By varying the speed of the drum and the speed of the transport worm, dwell time and peeling quantity can be controlled.
Due to the special shape of the drum and the placement of the knives, flat peeling of the product is effectively avoided. The waste is separated directly from the product and flung out through the rotating drum. It can be collected and disposed of in a crate or waste conveyor via the waste funnel at the bottom of the machine.
In the MS-20/Combi version, non-pre-peeled product can also be peeled. A number of peeling plates are provided in the drum to replace the effect of pre-treatment.
RLT-60/200 Roller inspection table
The Sormac roller reading table consists of a transport system with transport rollers fitted with grip profile. Laterally, the transport rollers are mounted on plastic chains that are moved by the drive. This movement causes the conveyor rollers to rotate. The product lying on top is thus rotated, allowing visual inspection from all sides. The transport rollers are easy to exchange.
Therefore used machines
- Quickly available
- Lower purchase costs
- Less amortization
- Same functionality
Machines for Potatoes
Are you interested in this machine?
We have the following options for you:
Request quote
Please send me a quote of this machine.
I want to add this machine to my request and look further.
Choose this option if you want a quotation on multiple machines.
I have a question about this specific machine.
I am interested in this machine but I want to ask a question first.